How to make wood floors less slippery and not to scratch it

BloggingLeave a Comment on How to make wood floors less slippery and not to scratch it

How to make wood floors less slippery and not to scratch it

How to make wood floors less slippery

Wood floors are not naturally slippery. Wood floors can become slippery if they are wet, or if there is something on their bottoms. The best way to prevent slippage on wood floors is to keep them dry and clean. Children who are prone to slip and fall on wood floors should be reminded regularly.

    1. One part vinegar to two parts water. Use this solution to clean the floor of old waxy residues or cleaning products that can make floors slippery. To absorb any liquid left on the floor after mopping, you can use a dry mop to wipe it down.
    2. Non-slip rugs should be placed in areas that are prone to slippage or receive a lot of traffic. To prevent floors from getting wet, place absorbent mats under sinks or indoors.
    3. Clean up any spillages and messes immediately. It is important to keep the floor dry and clean to prevent it from getting slippery.
    4. Place doormats at every entrance of the house. Encourage guests and family members to clean their feet before they go in. This will remove any sticky residue from the soles of your shoes. It also helps dry them, making it less likely that they slip on wooden floors.
    5. If none of these solutions work, apply a nonskid solution to the floor. Select a product that is designed for wood floors. It is best to test it in a small area so you can see if it will not damage their wood floors.

Things You Will Need

      • Vinegar
      • Mop
      • Rugs and absorbent mats with nonslip backing
      • Doormats
      • Optional nonskid treatment

Tip

Use the right cleaning products for your wood floor. The wrong cleaners can leave a sticky residue on the wood. Use vinegar to clean your floors if you are unable to find a commercial cleaner.

Is it easy to scratch wood floors?

Wood floors are prized for their beauty, warmth, and durability. However, homeowners might be worried about scratching wood flooring. It all depends on what wood you use. laminate flooring Wallasey is not as scratch-resistant as tile or stone, but some wood types are more difficult to scratch. The type of wood used, the grain pattern, and whether the flooring is protected with a hard coating will determine how scratch-resistant it is.

Take a look at the Janka Rating

Hardwood floors can be rated using the Janka hardness scale. This scale assigns a hardness rating to wood floors based on their resistance to indentation. It measures how much pressure it takes for a mark to form in the wood. The wood is more difficult to scratch the higher the rating. Red oak, for example, has a rating of 1,290. It doesn’t easily scratch during normal wear and tears such as foot traffic and sliding a dining table chair over it. Hickory has a rating of 1,820, making it even more difficult. Brazilian walnut is almost three times harder than red oak, with a rating of 3,680. Softwoods are lower on the scale which means they are less resistant to damage and scratching. Douglas fir, on the other hand, is rated at 690.

Hardwood or softwood

Both hardwoods and softwoods can be used for flooring, but they have different scratch resistance. Hardwoods like pine, spruce, and fir are more prone to scratching with regular use. They are therefore better suited for areas in your home that aren’t subject to a lot of foot traffic, such as a bedroom. Hardwoods like oak, maple, and birch are more resistant to scratches than softwoods. These woods are great for high-traffic areas like your living room or kitchen, where furniture is frequently slid across the floor or dropped onto the floor.

Grain Pattern and Cut

The floor’s wood grain pattern can affect its scratch resistance. Because of their tight grain patterns, hardwoods such as oak are more resistant to scratching than those with a wider grain. How floorboards are cut can also affect how durable the wood will be. Quarter-sawn flooring has an edge or vertical grain. It is, therefore, more resistant to wear and will not show scratches easily. Plain-sawn flooring is flat in grain and can show visible grain patterns. This flooring type may not last evenly and may show more scratches.

Improved scratch resistance

Protective finishes are the best way to protect your wood floor from scratches. While penetrating sealers can be applied to wood to protect from moisture, they do not offer scratch protection. Polyurethanes or varnishes create a protective coating on the surface that resists moisture, scratches, and stains. Wood floors can scratch easily, but the finish on the surface is not impervious to moisture, scratches, and stains. Therefore, they are usually refinished at least twice every two to three years.

Leave a Reply

Back To Top